Rustic buffet table – It only takes basic design skills to construct a buffet table for your hallway or living room. Sand all the pieces of wood with a light-grade paper. Remove sanding residue with a sticky cloth. Apply a light coat of polyurethane on one side and the edges of the two wooden plates, and the decorative trim table leg. Let dry polyurethane. Reversible cherry panels and legs and to add a coat to the other side. Allow to dry. Continue applying layers of polyurethane, until you achieve the finish that you like.
Add the four table legs on a flat surface. Attach “L” bracket to the top of each leg of rustic buffet table. Place a bracket on one leg and mark the spots of the screws. Drill holes at these marks, and put the screws to fasten the bracket. Measure 18 inches from the top of each leg and put another “L” seized. directly below the top bracket. Drill holes before inserting the screws.
12 Picture Gallery: How to make a Rustic Buffet Table
Rustic buffet table – L style
Place a cherry panels face down on a flat surface. Attach “L” bracket at the top of each leg of each corner of the panel. Turn the rustic buffet table, so it stands upright. Attach the remaining cherry wood panel on the four lower “L” brackets. Place the buffet table at the back. Run a bead of wood glue along the front edges of each wooden panel. Place decorative trim on the glue and secure with finishing nails, located approximately every 6 inches.
This post topic: Rustic Design