Skirted ottoman – A skirt with ottoman adds a formal touch to an ordinary stool. Making an ottoman that fits your home and decor are one of the easier upholstery projects. Adding a skirt can decorate the finished appearance. Look for fabrics that are durable and drapes well. Because an ottoman can be used for a seat or additional table area, consider treating your fabrics with a spray-on land protector to extend the life of your new stool. These rounds are sold in most home improvement stores in the lumber aisle. Space four legs attachment brackets 1 inch from the edge and evenly spaced apart along the edge of the board. Insert the bolts, washers and bolts to hold each leg securely mounted on wood.
Place quilt batting twice the size of the circle on the work table. Place the plywood skirted ottoman foam side down and centered on the batting. Pulling batting on the back underside of the plywood and stapling. Start at the top, and then drag the bottom, left and right. Follow this pattern, moving away from your starting points in each direction. Continue until the batting is completely attached to the tree. Follow the same bonding pattern and technique used for batting. Trim off excess fabric. Screw on the ottoman leg. Legs are sold in most home improvement stores.
Power consumption in standby up the skirted ottoman and measure from the underside of the Ottoman to the floor. Add 4 inches. Cutting fabric, twice the circumference and your measured height. Fold the bottom edge on the inside 1/2 inch and sew a seam. Turn the Ottoman head. Measure from your hem altitude targets. Place fabric face side down and hem side out. Staple your account targets close to the edge of the bottom edge of the plywood. Fold the fabric 1/4 inch back toward short 1 inch from your first short.
12 Picture Gallery: How to Make Skirted Ottoman
This post topic: Ottoman Ideas