Installations IKEA Expedit Entertainment Center – IKEA makes some very functional, affordable and easy-to-assemble furniture. IKEA Expedit entertainment center are available in many different colors and sizes Instructions to installations IKEA expedit entertainment center. Place the box on the floor in the area where you want to set the bookshelf. Make sure you have enough space to mount the shelf on the floor. Open the box and start removing pieces and spread them out on the floor. Remove the bottom panel and attach plastic feet on the bottom of the panel. Take off the four main pieces and put them on was in a square on the floor.
Next steps to installations IKEA expedit entertainment center, put the small wooden dowels in the predrilled holes. Connect the two corner pieces and screw them together with the screws. Tighten almost all the way with the supplied Allen key. Start adding the interior shelves. These shelves have pre-drilled holes that fits into the wooden plugs attach to the external pieces. Attach the inner plank to start the next row of shelves. Connecting the upper end of the plank to the outside through the shelf to assemble the pre-drilled hole in the plug is connected.
12 Picture Gallery: Installations IKEA Expedit Entertainment Center
Next steps to installations IKEA expedit entertainment center, repeat the process until you have all the internal shelves. The dowel should go through the plank and connect the inner shelves on both sides. Add the remaining outside pieces, but not screw them over. If you screw them in too early you will not get all of the outside pieces to line up correctly and you will be here all night. Get them loosely attach when you connect all the pieces. When they are all connect and rough line, you can start to tighten. Tighten all the pieces and slide the bottom of the case near the wall.
This post topic: IKEA IDEAS