King size platform bed – To make king size platform bed, things you’ll need are 4 beams, 2 inches by 18 inches by 80 inches; 2 sheets of wood, 1/2 inches by 78 inches by 40 inches; 1-inch wood screws; screwdriver with screwdrivers and sandpaper. Starting with place two beams in the ground, parallel to each other with their ends aligned. They should rest on the narrows – 2 inches wide – edges. Set them so that their outer edges are 80 inches apart.
Next steps to make king size platform bed is, define the third and fourth beams between the other two, ends aligned with them and with each other. Space evenly, leaving about 26 inches of space between beams. Place the first sheet of wood on top of one half of its underlying beams, running perpendicular to the length of the beams.
Screw into place using six evenly spaced wooden screws that run along the centerline of each beam. If you have trouble keeping the beams vertical during this step, focus on one beam at a time and let others fall until you need them. Lay the second sheet down to cover the exposed parts of the beams. Screw in place as you made the first sheet. Sand all visible surfaces of your wood. And your new king size platform bed was ready to use.
12 Picture Gallery: King Size Platform Bed: Make Your Own
This post topic: King Beds