Wood Adirondack Chairs – wooden slats of an old fence can be reused for a variety of projects, including outdoor furniture such as a chair of the type Adirondack, a model with a lowered angular seat that goes toward the ground. You can do it by measuring and cutting the wood slats before using them in the project.
For makes wood Adirondack chairs using wood recycled with steps measure two wooden sections 60 cm in length and 7.5 cm width with the tape. Cut the strips on the necessary measures with the circular saw. These will be the front legs of the chair. Measure and cut the two pillows for arms with 80 cm long by 10 cm wide. Measure and cut the supports for seats 90 cm long by 10 cm wide. Measure and cut the supports for legs, measuring 55 cm by 5 cm wide. Measure and cut a piece cross-shaped measuring 60 cm long by 10 cm.
12 Picture Gallery: Make Wood Adirondack Chairs Using Wood Recycled
Round off the edges of the wood Adirondack chairs holders with the saw and cut a 45 ° angle at the other end, using the circular saw. Secure the crosspiece to seat holders with furniture stapler. Place three clips on the piece cross-shaped, fixing it into the seat holders.
This post topic: OTHER FURNITURE