Making Outdoor Wicker Rocking Chairs

Jan 31st
Black Outdoor Wicker Rocking Chairs
Black Outdoor Wicker Rocking Chairs

Outdoor wicker rocking chairs – Rocking chairs originated in North America. The first signs appeared in the eighteenth century when used in gardens. Modern rockers are used as furniture both inside the home and in abroad. The purpose of the rocker defines the type of wood used. Softwood lumber is sufficient for interior rocking chairs, with pine as a good cheap option. For exterior, hardwood is the best choice being the oak a good choice as it is resistant to climate time.

Outdoor wicker rocking chairs cut two forelegs with dimensions of 3 1/2 inches by 24 inches (8.9 cm by 61 cm). The thickness of all parties should be 3/4 inch (2 cm). Do 5 slots 1/2 inches (1.3 cm) long and 3/4 (2 cm) deep each for a reciprocating saw. Slots begin to 9 1/2 inches (24 cm) of the lower parts of the legs.

12 Picture Gallery: Making Outdoor Wicker Rocking Chairs

Outdoor wicker rocking chairs, paste the front bracket 1 1/2 inches by 22 inches (3.8 cm by 56 cm) to the slots. Provides enough time for the glue to dry and then screwed on the front support with a screwdriver slot time. Both rear beam with dimensions of 5 1/2 inches by 38 inches (14 cm by 97 cm) legs. Cut them with a jigsaw. Make a curved shape according to your preferences. Note that the back plate is 17 feet (5.2 m) from the front of the chair.

This post topic: WICKER CHAIRS

Other Interesting Things About WICKER CHAIRS Photos