Modern dog beds – You can build a wooden dog bed for a short time to get your dog from the floor or your bed, and in his own bed every day. With a few simple cuts and measurements, you can build a dog bed in less than a day.
How to make a modern dog beds, measure the length and width of your dog pillow. Cover the bottom of each table leg with wood glue and press one leg each on each top corner of the plywood. Line up the outer edges of each leg with the outer edges of the plywood to create an even finish. Measure the distance between each of the pins along each of the four sides. Cut a portion of the 1-by-4 inch poplar table for each measured length. Press each section of poplar table in the area is measured by. Drive a nail every 4 inches along the bottom edge. Drive nails through the plywood to participate in poplar board securely.
Attach one corner brace to each inner side of the legs to ensure poplar board space. Nail one end of the corner brace to poplar board end and the opposite end of the corner brace to the interior of the leg. Secure the corner braces along the interior of the bed frame, so they are not visible from the outside. Turn the bed again and place a small bun foot in each corner, just below the corresponding leg. Use a straight-top mounting plate to attach each bun feet. Turnover of the modern dog beds and position the pad inside.
12 Picture Gallery: Modern Dog Beds Style
This post topic: Modern Bedding