Queen size bed with drawers – To build queen size bed with drawers is not very difficult. Firstly, cut a 29-by-3/4-of-3/4-inch track down the width of a 31-by-9-for-one-inch pine, using a router. Cut two slots perpendicular to the first overlapping ends of the two tracks with the first track. Make these slots 7-by-3/4-by-3/4-inch each. The grooved side of the tray is the back of the drawer face.
Second steps to build drawer for queen size bed with drawer is, fill the grooves on the back of the drawer face with a wooden tile. Insert a 24-by-7-by-3/4 inch piece of plywood into each of the shorter slots. Insert a 27 1/2 of 24-by-3/4 inch piece of plywood into the longer slot. Apply wood tile where three pieces of plywood meet. Attach the parts together with the finishing nails hammered. These through the side of the shorter pieces into the edge of the longer pieces.
Third, applies to timber to the end of the shorter pieces and the rear edge of the longer pieces. Place a 29-by-7-by-3/4-inch piece of plywood against the glued edges. Hammer treatment nails through the side of the plywood in the glued ends. Last, repeat steps 1 through 3 once with additional pine, plywood, glue and finishing nails to create a new drawer for queen size bed with drawers.
12 Picture Gallery: Queen Size Bed with Drawers: Build the Drawers
This post topic: Queen Beds